ASTM F104 713230E23M6

Download Data Sheet


Service Limits

Temperature Limits
Maximum720°F (380°C)
Continuous Max390°F (200°C)
Pressure Limits
Maximum1450 psi (70 bar)
Continuous Max580 psi (50 bar)
ASTM F104Line Call Out713230E23M6
Available Sheet Sizes
Thickness1/64", 1/32", 1/16", 3/32", 1/8"
Sheet Sizes59" x 63"
59" x 126"

Typical Physical Properties

ASTM Test MethodPropertyValue
-Density118 lb/ft^3 (1.9 gm/cc)
F36Recoverymin 40%
F38Tensile Strength Across Grain2680 psi (18.5 N/mm^2)
F495Ignition LossMax 37%
F146Thickness Increase After 5 Hour Immersion
-ASTM IRM 903 @ 300°F (150°C)Max 20%
-ASTM Fuel B @ 77°F (25°C)Max 15%
F136Weight Increase After 5 Hour Immersion
-ASTM IRM 903 @ 300°F (150°C)Max 20%
-ASTM Fuel B @ 77°F (25°C)Max 15%


Style NA1000M is a compressed non-asbestos sheet gasket material produced from aramid fibers, reinforced with a woven wire mesh and bonded with nitrile rubber (NBR). The sheet is graphited on both sides. Style NA1000M is manufactured through the hot calendar process under rigorous quality control standards that are registered under ISO-9001 certification.

Application / Service

Style NA1000M is a premium service gasket material that is ideally suited for applications with fluctuating pressures
and temperatures. It has a broad range of applications in the process industries and in the water and wastewater industry. It is also commonly used in equipment such as pumps and valves. Style NA1000M is suitable for service handling that following general media categories:

  • Mild inorganic acid
  • Mild organic acid
  • Air
  • Industrial gases
  • Aliphatic solvents
  • Animal oils
  • Water
  • Brine
  • Diluted Alkalis
  • Synthetic oils
  • Vegetable Oils
  • Petroleum and Derivatives

Comparable to

  • Thermoseal (Klinger) C4408

Quote Cart

Your cart is empty